'67-'72 bumpside parts

Private parties only. No eBay/Craigslist listings.

Moderator: FORDification

User avatar
danno
Preferred User
Preferred User
Posts: 250
Joined: Sun Dec 30, 2007 12:46 am
Location: Ocala,Florida

Re: '67-'72 bumpside parts

Post by danno »

knucklejs wrote:Sorry, but not yet. Was doing storm cleanup all night from the weekend storms that rolled through. It might be another day or two...

no problem, good luck with all that storm stuff. I get enough of that down here ! :cry:
65 f-100 4wd short bed 360engine c-6 tranny
knucklejs
New Member
New Member
Posts: 87
Joined: Wed Oct 13, 2010 9:41 am
Location: Eastern Iowa

Re: '67-'72 bumpside parts

Post by knucklejs »

crewcabfan wrote:Location please, also pics of tailgates. Thanks
here's a few pics of the gate I have left. It's pretty straight, has a very slight bow in the top, and 1 small rust pinhole in the very bottom edge
You do not have the required permissions to view the files attached to this post.
1967 F100 52,000 orig miles- current CV swap and drop, shortbed conv
4 '65-'66 mustangs
2 '65 Galaxies
'59 Fairlane
'48 F1
'39 Ford Sedan
'65 Tiger (the real deal)
1barn full of Ford parts
1 VERY understanding wife!!!
chicof100
Preferred User
Preferred User
Posts: 468
Joined: Fri Jun 18, 2010 7:31 pm

Re: '67-'72 bumpside parts

Post by chicof100 »

I sent you a P.M. Iposted on here also. Now I see a picture of the grilles. I want them. [use the PM or e-mail buttons] Robert
Or post some kind of response here. Thank you.
Last edited by DuckRyder on Mon Jun 03, 2013 7:15 pm, edited 1 time in total.
Reason: Removed phone number which causes spam and robots to overload the server.
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
chicof100
Preferred User
Preferred User
Posts: 468
Joined: Fri Jun 18, 2010 7:31 pm

Re: '67-'72 bumpside parts

Post by chicof100 »

knucklejs wrote:here's a pic I took yesterday- haven't had a chance to get them down for a closer pic and/or cleaning.....
I want the grilles. Please contact me. [using the PM or EMail buttons] Ask for Robert
Last edited by DuckRyder on Mon Jun 03, 2013 7:11 pm, edited 1 time in total.
Reason: Removed E-Mail and Phone Number which causes spam and robots to overload the server.
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
knucklejs
New Member
New Member
Posts: 87
Joined: Wed Oct 13, 2010 9:41 am
Location: Eastern Iowa

Re: '67-'72 bumpside parts

Post by knucklejs »

sorry- still haven't drug them down out of the rafters yet, but hoping to do so over the next few days or so. Easier said than done as I have to move a few dead project vehicle for access! I'll try to post some close up pics as soon as I can. Thx! :oops:
1967 F100 52,000 orig miles- current CV swap and drop, shortbed conv
4 '65-'66 mustangs
2 '65 Galaxies
'59 Fairlane
'48 F1
'39 Ford Sedan
'65 Tiger (the real deal)
1barn full of Ford parts
1 VERY understanding wife!!!
User avatar
guhfluh
Blue Oval Fan
Blue Oval Fan
Posts: 650
Joined: Tue Mar 15, 2011 3:31 pm
Location: Houma, LA

Re: '67-'72 bumpside parts

Post by guhfluh »

I got the horn button in today, thanks!
'67 F-250 Crew 2wd 300ci, T-170/RTS/TOD 4-speed overdrive
'96 Dodge Ram ECLB CTD
'99 Dodge Neon ACR 2dr - 10.64@130 (Sold)
'05 Infinity G35 Sedan
ponyexpress
New Member
New Member
Posts: 127
Joined: Sun Jun 03, 2012 2:39 pm
Location: Chicopee, MA

Re: '67-'72 bumpside parts

Post by ponyexpress »

How much for the 71 manual steering column? Thanks.
knucklejs
New Member
New Member
Posts: 87
Joined: Wed Oct 13, 2010 9:41 am
Location: Eastern Iowa

Re: '67-'72 bumpside parts

Post by knucklejs »

guhfluh wrote:I got the horn button in today, thanks!
Glad to help! Did you find the cluster gauges you needed- I have those too.. :thup:
1967 F100 52,000 orig miles- current CV swap and drop, shortbed conv
4 '65-'66 mustangs
2 '65 Galaxies
'59 Fairlane
'48 F1
'39 Ford Sedan
'65 Tiger (the real deal)
1barn full of Ford parts
1 VERY understanding wife!!!
knucklejs
New Member
New Member
Posts: 87
Joined: Wed Oct 13, 2010 9:41 am
Location: Eastern Iowa

Re: '67-'72 bumpside parts

Post by knucklejs »

ponyexpress wrote:How much for the 71 manual steering column? Thanks.
Took a closer look at it- the shift collar is somewhat hogged out like they normally are and the lower bearing is smoked. If it's still useable for you let me know. Thx
1967 F100 52,000 orig miles- current CV swap and drop, shortbed conv
4 '65-'66 mustangs
2 '65 Galaxies
'59 Fairlane
'48 F1
'39 Ford Sedan
'65 Tiger (the real deal)
1barn full of Ford parts
1 VERY understanding wife!!!
chicof100
Preferred User
Preferred User
Posts: 468
Joined: Fri Jun 18, 2010 7:31 pm

Re: '67-'72 bumpside parts

Post by chicof100 »

I still want the grilles.
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
jamieth29
New Member
New Member
Posts: 8
Joined: Wed Apr 20, 2011 8:44 pm

Re: '67-'72 bumpside parts

Post by jamieth29 »

Hey what are you asking for a short box? Pics would be great.
User avatar
guhfluh
Blue Oval Fan
Blue Oval Fan
Posts: 650
Joined: Tue Mar 15, 2011 3:31 pm
Location: Houma, LA

Re: '67-'72 bumpside parts

Post by guhfluh »

Thanks for asking! No, I haven't yet. I need to research more on what I need, in order to swap in the gauges. I thought it was only the gauges and sending units, but I'm not certain if the cluster circuit board and associated wiring are different too on my 67. I've been fighting with installing A/C and adapting my stock push/pull bezels and knobs, so everything else has gotten put aside. You can give me a price on what you have though.
'67 F-250 Crew 2wd 300ci, T-170/RTS/TOD 4-speed overdrive
'96 Dodge Ram ECLB CTD
'99 Dodge Neon ACR 2dr - 10.64@130 (Sold)
'05 Infinity G35 Sedan
chicof100
Preferred User
Preferred User
Posts: 468
Joined: Fri Jun 18, 2010 7:31 pm

Re: '67-'72 bumpside parts

Post by chicof100 »

knucklejs wrote:here's a pic I took yesterday- haven't had a chance to get them down for a closer pic and/or cleaning.....
How are you doing on these grilles? I want to buy all of them.
1964 f100
292 yblock
1969 Ranger
Loving all ford vehicles
User avatar
72stepside
Blue Oval Fan
Blue Oval Fan
Posts: 537
Joined: Tue May 09, 2006 10:31 pm
Location: Florida, Milton
Contact:

Re: '67-'72 bumpside parts

Post by 72stepside »

I could use a good set of armrests for my 71. Black would be preferred but I could dye any color I guess. Shipping to 32570? Shoot me a PM if you gottem!
Chris
72 F100 Stepside w/ 78 300 CID
Hedman Headers
Disc Brakes
Power Steering with 3 STILL on the tree
Comfy Crown Vic Seats

71 F250 PS, PB, AC, Auto, 390
Loooong way to go on this one!

ImageImage
ImageImage
User avatar
colnago
100% FORDified!
100% FORDified!
Posts: 1882
Joined: Tue Jun 14, 2011 8:48 pm
Location: Ridgecrest, CA

Re: '67-'72 bumpside parts

Post by colnago »

Horn button came the other day, put it in yesterday. Interior looks so much better!

Thanks,

Joseph
"Sugar", my 1967 Ford F250 2WD Camper Special, 352FE, Ford iron "T" Intake with 1405 Edelbrock, Duraspark II Ignition, C6 transmission, front disc brake conversion.
Post Reply