Manny's 67' F-250 Highboy Restoration

Post progress reports on your project truck(s)

Moderator: FORDification

Post Reply
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: Manny's 67' F-250 Highboy Restoration

Post by Manny »

hfdco4 wrote:Nice work sir. You will love the side tool box.
I hope so being a what if highboy camper special gotta have the toolbox.

briansbronco wrote:Instigator.....
You have no idea when it comes to projects how bad i am... :evil:

Here is the rest of the box work up to where i am now.
I have two boxes for donors off two trucks.

Image

Taking them apart i noticed the factory braces were on all the bedsides even with the toolbox hole. Then cut off for the box installation. After that the box acted as the brace. You Ford factory trivia for today.
Image

The Arizona panel got the nod so started trimming and mocking.
Image

To get a good solid mock i cut it a couple of times to get my marking line right as i want a butt joint.
Little scary.
Image

Very scary but happy with the line...
Image

Some :cuss: several magnets and pliers a patience got somewhere
Image

:woohoo:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
cdnwillyg
Preferred User
Preferred User
Posts: 364
Joined: Sun Oct 29, 2017 7:17 pm
Location: Alberta, Canada

Re: Manny's 67' F-250 Highboy Restoration

Post by cdnwillyg »

Hey Manny you still got a hole there! :D
That looks good, not so bad right?? :thup:
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
User avatar
67mann
100% FORDified!
100% FORDified!
Posts: 1705
Joined: Thu Feb 07, 2008 7:19 am
Location: NY..Mt.Morris 3rdgen. homestead

Re: Manny's 67' F-250 Highboy Restoration

Post by 67mann »

:hd: nice job Dan.....always loved that tool box feature.... I'll date myself :D as a younger lad To live and Die in LA movie truck

Image
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: Manny's 67' F-250 Highboy Restoration

Post by Lone Ranger »

Wow great work manny! You are brave but looks like it'll look great when done! I'd also like a tool box. You should have them on both sides!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1311
Joined: Mon Apr 01, 2013 1:45 pm

Re: Manny's 67' F-250 Highboy Restoration

Post by hfdco4 »

Ranger, I was thinking the same thing about both side. :yt: :woohoo:
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Lone Ranger
Blue Oval Fan
Blue Oval Fan
Posts: 663
Joined: Tue Jun 21, 2016 2:27 pm
Location: Northern Michigan

Re: Manny's 67' F-250 Highboy Restoration

Post by Lone Ranger »

It would be one of a kind. You'd have to use the other toolbox to carry a stick so you could keep the ladies away!
1972 f100 4x4 4 inch lift with dump box kit-sold
1969 f250 4x4 highboy in progress.
http://www.fordification.com/forum/view ... 22&t=85251
Kyle
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1311
Joined: Mon Apr 01, 2013 1:45 pm

Re: Manny's 67' F-250 Highboy Restoration

Post by hfdco4 »

Now that's just funny!
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
popeyes71
Blue Oval Guru
Blue Oval Guru
Posts: 1176
Joined: Tue Jan 31, 2012 3:46 pm
Location: Bay Area, Ca.

Re: Manny's 67' F-250 Highboy Restoration

Post by popeyes71 »

Looking good! I wish mine had a tool box. :thup:
-Popeye-
1971 F-250 4x4 Highboy
1966 Chevy Nova, 8 second 10.5 car
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: Manny's 67' F-250 Highboy Restoration

Post by Manny »

67mann wrote::hd: nice job Dan.....always loved that tool box feature.... I'll date myself :D as a younger lad To live and Die in LA movie truck

Image
Chrome jackman wheels!!!!!! Love it
Lone Ranger wrote:It would be one of a kind. You'd have to use the other toolbox to carry a stick so you could keep the ladies away!
Y'all are funny on the two tool box deal had a friend state the same thing!! But no this 7,000,000,000,000 tac weld deal is getting old already. :lol:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: Manny's 67' F-250 Highboy Restoration

Post by Manny »

So i've been out and i apologize. Here is my status updates which is not overwhealming but i will try to pick up the pace. First off i got some parts that are back available again thankfully!
Image

Image

Been still welding grinding the bed side. Had a slight issue with the bed side box though. APPARENTLY there are different liners 2wd to 4wd.. Seems that way as i whacked into the spring hanger. Guess i may copy HFDCO and go to the 2wd hangers or change it around...
Image

Now gotta make my mind up on rear spring stuff don't wanna cut the box.

Image

Image

What i got for now gonna be at it tomorrow after church! :D
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
cdnwillyg
Preferred User
Preferred User
Posts: 364
Joined: Sun Oct 29, 2017 7:17 pm
Location: Alberta, Canada

Re: Manny's 67' F-250 Highboy Restoration

Post by cdnwillyg »

Nice work Manny, I get where you are coming from about the box cutting but that maybe the easiest way to allow for your spring hanger. It doesn't look like you would loose to much from the box.
1968 Mercury M250 Camper Special
FE-390,570CFM 4bbl, C6 Automatic, PS, PB front disk.
Stony Plain, Alberta, Canada
:drive:Willy
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1311
Joined: Mon Apr 01, 2013 1:45 pm

Re: Manny's 67' F-250 Highboy Restoration

Post by hfdco4 »

Looking good Manny!
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
User avatar
Manny
Blue Oval Guru
Blue Oval Guru
Posts: 1190
Joined: Wed Oct 04, 2006 7:15 pm
Location: Georgia, Lake City
Contact:

Re: Manny's 67' F-250 Highboy Restoration

Post by Manny »

cdnwillyg wrote:Nice work Manny, I get where you are coming from about the box cutting but that maybe the easiest way to allow for your spring hanger. It doesn't look like you would loose to much from the box.
I've had my mind on a little bit of altitude adjustment like 2 inches or so. Also not a fan of that big old lift block so this hanger deal may be an excuse to get my lift help eliminate the block. Trust me if suspension was done we would be cutting the box and fitting it. As i am still so green on the project and not fully sorted yet that's why i'm thinking of the hangers suspension mod stuff. I'll get this figured out one day.. :lol:
Just another Ford fool named Dan.
The Junk that hangs around
67' F-250 highboy Camper special cross breed currently under way
http://www.fordification.com/forum/view ... 22&t=86706
1974 Bronco 302 3 speed
1984 bronco 302 c6 35's
1994 F350 7.3 5spd dually.
woods wrote: The rust holes in my truck were a factory install (very rare).
User avatar
Bullitt74
Preferred User
Preferred User
Posts: 430
Joined: Thu Sep 22, 2016 5:34 pm
Location: Red Deer, Alberta, Canada

Re: Manny's 67' F-250 Highboy Restoration

Post by Bullitt74 »

Very cool work thus far - loving this build!
Steve F.
Red Deer, Alberta, Canada
'72 Ranger XLT, 4x2, 390-2V, C6, Wind blue & Wimbledon White (‘Smokey’)
8)
2016 F150 Lariat FX4 Supercrew, Ruby Red
Follow my build thread for 'Smokey': http://fordification.com/forum/viewtopi ... 22&t=85070
User avatar
hfdco4
Blue Oval Guru
Blue Oval Guru
Posts: 1311
Joined: Mon Apr 01, 2013 1:45 pm

Re: Manny's 67' F-250 Highboy Restoration

Post by hfdco4 »

So you are keeping the closed knuckle axle in the truck? I figured you would swap to one of your High Pinion axles.
Paul
:fr: FE390PC
1970 F250 4x4
2016 F150 4x4 2.7 ECO
Gone 1997, 1999 & 2003 F150 4x4s
Gone 1988, 1989 & 1991 Broncs
Post Reply