Door trim ring clips - I think I've got enough now!

Moderator: FORDification

Post Reply
JoshT
Preferred User
Preferred User
Posts: 327
Joined: Sat Oct 10, 2015 11:09 pm
Location: Middle Georgia

Door trim ring clips - I think I've got enough now!

Post by JoshT »

I'm in need of a bunch of the clips that hold on the interior door trim ring. When I put the truck back on the road in 2018, I pulled the door panels to install better window regulators. In the process a lot of the clips for the trim ring disappeared. I know exactly where I placed them when I removed them, a few weeks later they were gone. Don't know if dad needed to work on something right there and moved them, if I got smart and bagged them up then forgot where I stored them, or if they accidentally got thrown out when cleaning up. Regardless of what happened, I've been looking for them since and have yet to find them.

Door trim rings take 12 per side for a total of 24. I've got 4. If you've got 20 you can sell me, that'd be awesome. If you've just got a few you can let go of that'd be great as well, I'll just collect until I get enough. Should I come across the missing ones in the future I'll pass them along to someone else that needs them. Please let me know what you've got.

Thanks!
-Josh
Last edited by JoshT on Sun Apr 04, 2021 4:20 pm, edited 1 time in total.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Door trim ring clips

Post by basketcase0302 »

I lost a boat load of bookmarks last week Josh but try these folks:

https://www.amkproducts.com/parts/ford/ ... fasteners/
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
JoshT
Preferred User
Preferred User
Posts: 327
Joined: Sat Oct 10, 2015 11:09 pm
Location: Middle Georgia

Re: Door trim ring clips

Post by JoshT »

I'll check there, but I don't recall seeing them on the site in the past. As far as I have found, no one reproduces them.

A guy on the Facebook group said he's got about 15 he'll send me. That's a good start and will be enough to put them back on even if not fully secured. I'll see how many I actually get after the post office gets done destroying the package. I'll update quantity needed once I know.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

Re: Door trim ring clips

Post by basketcase0302 »

I know I've seen these for the dent panels, (and for the outside chrome "beltline" trim") Josh just not sure about the inside panels. :hmm:
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
User avatar
67mann
100% FORDified!
100% FORDified!
Posts: 1698
Joined: Thu Feb 07, 2008 7:19 am
Location: NY..Mt.Morris 3rdgen. homestead

Re: Door trim ring clips

Post by 67mann »

:hmm: I can look this wknd... I know I got panels with trim that I won't be using for my truck
I've had enough and I'm not alone
http://s267.photobucket.com/albums/ii304/67mann/
JoshT
Preferred User
Preferred User
Posts: 327
Joined: Sat Oct 10, 2015 11:09 pm
Location: Middle Georgia

Re: Door trim ring clips

Post by JoshT »

Well guy on facebook sent them out on March 9th. I still haven't gotten them. I don't know if USPS is being super slow or if they got lost and/or delivered to the wrong place. For now I'm still needing them.

Edit: Finally arrived. Got what I needed.
1968 F-100 4x4 long bed - 360 FE - NP435 w/ Dana 21 - PS & PB conversion - Front Disc Swap - 265/75R16 - 1" S.L. & 2" B.L. (to be removed) - Homemade tube bumpers - Warn 8274 - Currently wearing 1970 body
Post Reply